Long coding helperBYTE 16 check Bit 0 “Comfort Blinking (Highway Blinking) active.”Ĭomfort Turn Signals To 5 Blinks: (Change the number of times the indicators blink when you 'flick' the indicator stalk)Cent Elect - 09Adaptation - 10Click on the drop down menu and select “Comfort Turn Signals (cycles).” In the “NEW VALUE” window, hit up or down to your desired selection.
![vcds code vcds code](https://www.ross-tech.com/vcds/tour/screenshots/coding.png)
Long Coding Helper - Byte 17 Bit 3 = Coming / Leaving Home with fog lightsĬoming Home Mode Automatic (only with light and rain sensor):Ĭhannel 23 - Coming Home Period 0 -> 90 secīyte 12 - Bit 0 = Timer Coming Home (0 = Start with KL 15 OFF / 1 = Start with door opening)Ĭomfort Turn Signals Enable: (the indicators blink when you 'flick' the indicator stalk)Cent Elect - 09Adaptation – 07 2 is recommended for track sport): ABS Brakes - 3Brake Assist - 0/1/2 Assist Avg/Low/highĬhange Coming/Leaving Home To Fogs:Cent Elect - 09 Auto lock doors after 15km/h, Auto unlock doors when key removed)Cent Elect - 09Adaptation - 10Auto Lock/Unlock (set both to on)Ĭent Elect - 09Coding - 07Long coding helperAutolock: Byte 0 - Bit 1Unlock: Byte 0 - Bit 2īluetooth Beep: (turn off the annoying beep when a phone connects to the car):Telephone - 77Adaptation - 10Bluetooth acknowledgement signal - offīase volume of speech outputChange the existing db value (4.76837e-007) in the box below this value to 4.0 Brake Assist: (changes braking ABS model a bit harder/softer.
#Vcds code windows#
:-Address 17:5K6 920 970 E recoded (Long Coding) from 470B00 to 470900 (01357/011/00200) Monday,25,April,2011,15:25:41:21184Address 17:5K6 920 970 E recoded (ADP-Staging) from not active to active Sunday,14,August,2011,16:11:26:21184Īlarm Acknowledgment Sound Enable (only with in-built Alarm):Īlarm Acknowledgment Visible In The Maxidot Comfort Menu:Ġ = frequency modulated alarm & 10 Tamper alarm (USA 5min) 1 = intermittent alarm signal & 10 Tamper alarm (EU, 5min) 2 = frequency modulated alarm & 1 Tamper alarm (U.S., 30s) 3 = intermittent alarm signal & 1 Tamper alarm (EU, 30s)Īllow opening of your doors while the windows are going up or down:Īutolock/Unlock:(Note you can do this in the Maxidot menu. You will have to manually reset each setting back the way it was one at a time though, just the way it was changed it the first time.Īny Long Coding changes you do will be saved in Ross-TechVCDSDebugCodingLog.TXT so you can see the original numbers you changed and what you changed it to, i.e. After the scan the log folders will record all of the changes you made. Before making any changes perform an AutoScan then you will be able to reset everything back to the original coding.